Adjusting the rear axle height changes the center of gravity (cg) on the kart, when you raise the axle this lowers the cg on the chassis. Lowering the rear axle will then raise the cg on the chassis.
Setup Tip: My kart two wheels, or raises the inside rear wheel by an excessive amount in the corners
In this case raise the rear axle up, do this by loosening the bolts on all axle bearings. Some chassis will have keyed holes with three positions making it easy to move up or down in steps. If you chassis has keyed holes you will need to fully remove the bolts.
Setup Tip: The rear of my kart slides/oversteers upon entry of the corner
Lower the rear axle using the steps above, this will give you more ride height in the rear. (Most chassis builders recommend starting in the full bottom hole on ride height)
If you would like a close seat on the racing action, and a free one as well, we welcome anyone who wishes to volunteer. Corner Workers have the best seat in the house, on race day HCKC can use up to three in the outfield. Pit-passes are free for volunteer corner workers, and you do not need to be a member to help out, anyone who is willing to help is welcome. Please show up around an hour early and ask for the Race Director, so we can show you some of the basics - flags, radio operation, etc.